How much lace do you need for a dupatta?
Measure once, add a little for corners, divide by 36. A worked example in gaz and meters so you buy the right length the first time.
Quick answer: add up the sides that get lace in inches, add about 10% for corners, and divide by 36 to get gaz. A 98 × 44 inch dupatta with lace on all four sides needs about 8¾ gaz (7.9 m).
Most people guess. Then they either come home a gaz short and go back to the bazaar, or they pay for lace that ends up in a drawer. Two minutes with a measuring tape fixes this.
1. Measure your dupatta
Lay it flat and measure the long side and the short side in inches. Don’t trust a “standard” size. Dupattas vary a lot between brands and tailors, and an unstitched suit’s dupatta may be cut differently from a ready-made one.
2. Decide where the lace goes
| Lace on | Add up |
|---|---|
| All four sides | 2 × length + 2 × width |
| The two long sides | 2 × length |
| The two ends (pallu) | 2 × width |
3. Add a little extra
Turning corners, joining two pieces and lining up the pattern all use length. Add about 10%. If the lace has a large repeating motif, add a bit more so the pattern meets nicely at the corners.
4. Convert to gaz
Shops sell lace by the gaz. One gaz is 36 inches, about 0.91 m. Divide your total by 36 and round up.
Worked example: a dupatta 98 inches long and 44 inches wide, with lace on all four sides.
- 2 × 98 + 2 × 44 = 284 inches
- Add 10%: about 312 inches
- 312 ÷ 36 = 8.7, so ask for 8¾ gaz, or 9 if the shop only cuts whole gaz
Or let the calculator do it
The lace calculator works this out for the dupatta, daman, sleeves, neckline and trouser hems together. Put in the price per gaz and it gives you the total too.